You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

For echosounder data products only. Currently used by the ASL Acoustic Profiler Time Series data products.

Ensemble Period

This option will cause the search to perform the standard box-car average resampling on the data. 'Boxes' of time are defined based on the ensemble period, e.g. starting every 15 minutes on the 15s, with the time stamp given as the center of the 'box'. Acoustic pings that occur within that box are averaged range or bin-wise, and the summary statistics, such as 'Data.nPingsAcquired' are updated. This process is often called 'ping averaging'. The process uses log scale averaging, which involves backing out the dB scale to pressure, compute the weighted average, and then compute the dB scale again. Weighted averages are used when raw files bridge an ensemble period and when the data is already an ensemble or ping average.

New files are started when the maximum records per file is exceeded (files will not exceed 1 GB of memory when loaded), or when there is a configuration, device or site changes. In the case where there is data from either side of a configuration change within one ensemble period, two files will be produced with the same ensemble period, the same time stamps, but different data. Users may use the ensemble statistics on the number of pings or samples per ensemble to filter out ensembles that do not have enough data. (As an aside, we do this by default with clean averaged scalar data - each ensemble period needs to have at least 70% of it's expected data to be reported as good.)

The default value is no averaging, meaning the data is not altered. Some echosounders are configured to do ping averaging during acquisition, so the data you request with with 'Data not altered (none)' could already be averaged. To determine if the echosounder is averaging data as it is acquiring it, check the device details page (e.g. http://dmas.uvic.ca/DeviceListing?DeviceId=22608, go to the additional attributes tab) or check the data products: see the comment field in the plots or the Config structure in mat files, look for Config.p Available ensemble periods are 1, 10, 15 and 60 minutes.

File-name mode field

Selecting an ensemble period will add 'Ensemble' followed by the ensemble period. For example '-Ensemble600s'.

Calibration

This option will apply the calibration to the data, when the calibration coefficients are available. The calibration calculation and coefficients are supplied by the manufacturer. See the device details page (additional attributes tab) to see the coefficients, see the instrument documentation page, or contact us for more details. These values are also provided in the mat file Config / Cal structure - see the ASL data product page for more information.

The default value is to apply calibration when available. The alternative option will provide the raw data only. Raw data has units of raw counts, which are proportional to the received acoustic pressure.

File-name mode field

'Calibrated' will be added if all the channels of the device were successfully calibrated.

Sun Elevation

This option applies to echosounder plots only. If 'Show' is selected, it appends a graph of the Sun's elevation over time below the acoustic data, such a plot is useful to correlate the acoustic data with dial (daily) and tidal effects, such as zooplankton migrations.

The default will not add a plot of sun elevation.

File-name mode field

No affect on file-name.

  • No labels