In Expedition Management, all dives are listed by organization, year, and cruise. Find the dive you want and click on the Play button to go to the annotation interface.

(Watch demo video)

Optional

In addition to the predefined layouts, you can drag, resize and remove individual panels. You can also revert to predefined layouts with a single click.

(Watch demo video)

• Video: Video display and control window. 
• Map: shows the location where the video was recorded. For ROV dives, the vehicle's track and annotation locations are also shown.
• Dive Details: ROV dive location, expedition, dates & times, goals.
• Annotation List: List of annotations already created for the current video.
• Annotation Entry: Tools for creating new video annotations.
• Sensor Readings: Environmental measurements recorded by sensors on the ROV or nearby the camera during the video.

When you open a dive in SeaTube V3, a map is displayed. This zoomable map shows seafloor bathymetry along with the track along which the Remotely Operated Vehicle (ROV) followed during the dive. Clicking a dot on the track line takes you to that point in the video.

(Watch demo video)

• play and pause
• control audio volume and mute
• watch video at half speed, normal speed, 1.5x speed and 2x speed
• skip forward and backward 30 seconds in the video, or 5 seconds using your keyboard arrow keys
  
• see the video date and time
• save video clips in your personal library
• take snapshots
• choose video quality 
• share a link to the video via Facebook, Twitter or URL
• expand to full screen

(watch demo video)

After recording your video clip segments, you can view them from the Playlist Management screen:

Viewing Video Clips

You can view, describe and share recorded clips on your personal playlist via the Playlist Management screen. (Watch demo video)

Downloading Video Clips

You can also download your playlists as video clips! (Watch demo video)

After you choose filtering options, don't forget to click Apply Filters. You can remove filtering by clicking Clear Filter.

(Watch demo video)

You can view readings from instruments attached to the Remotely Operated Vehicle during a dive. When first displayed, they are shown in numerical form, updated for each annotation. You can switch to graphical display sensor readings over time.

(Watch demo video.)

Here you can find information about the currently selected expedition and Remotely Operated Vehicle (ROV) dive. The Oceans 3.0 video archives hold video recordings from numerous expeditions and dives by many different ROVs.

The annotation entry widget is both powerful and customizable.

You can use taxonomies to standardize annotation entries. This makes them easier to find by filtering as well.

(Watch demo video.)

Quick Entry: Button Sets

You can use button presets to enter annotations quickly—at a single click.

(Watch demo video.)

You can choose from button sets that have already been prepared, or you can make your own custom button sets (explained in Advanced Tools below).

Quick Entry: Keyboard Entry

You can also use keystrokes for quick entry. Use the number keys to create annotations corresponding to that button number.

(Watch demo video.)

In addition to taxonomies and taxons, you can add attributes, such as count, material, or morphotype, to your annotations. Attributes are standard pieces of information that are commonly used in annotations.

(Watch demo video.)

Within SeaTube V3, you are able watch and provide annotations for either Live Video (from a dive that is in progress), or Historic Video (video that has been archived for a dive in the past). Toggle between Historic and Live modes by clicking the toggle buttons in the upper-right corner of the SeaTube V3 window. 

Note that this feature is only available when a dive is currently in progress; for previously completed dives Historic mode is the only option, so the toggle icons do not appear.

Historic Mode

This is the default mode for SeaTube V3 dive video, and active whenever the main SeaTube Annotation window is first opened, whether a current dive is in progress or not.

Upon entry, the Video widget will start playing the archived video from the start of the dive, and any previously entered annotations will appear in the Annotation List widget. All widgets (Map, Annotation List, and Sensor Readings) will highlight the values synced to the current video position time.

You can advance/rewind the video using the provided controls, or click on an annotation in the Annotation List to reset the video to corresponding point in time.

Creating an annotation will by default use a timestamp that corresponds to the current point in time of the video being displayed.

“Capture Time” will capture the current video time; the user may also enter/edit the time to be used using the controls provided.

Live Mode

This mode enables annotation teams to watch a live video feed and create annotations based on what they are witnessing in real-time. By default annotations that are created will utilize the current time for the timestamp (as provided by their personal computer OS).

“Capture Time” will capture the current system time; the user may also enter/edit the time to be used using the controls provided.

During Live mode, the user is not able to click on a previous annotation and watch the video from that point; in order to do so, they must switch to Historic mode.

Notes

Given the delays in receiving and re-streaming live video through SeaTube, some organizations (such as NOAA) require annotators to watch a more direct video stream to minimize these delays, but still prefer that the annotation time default to the current system time.

To enable this, the organization will provide a separate video URL for their users to watch in one browser window, while entering annotations via SeaTube V3 in a separate browser window.

To make sure the user is not confused with more than one video stream playing at once, they configure SeaTube V3 to not display any video while in Live mode.

Both NOAA and ONC are working on an enhanced solution that would allow the video time to be embedded directly in the video itself, which will resolve the original issue of the time delays between receiving a video stream and creating an annotation for a precise point in time.

In addition to the filter search in Annotation List, you can search through all video annotations to find video segments and annotations of interest. SeaTube Search allows you to scope your search by expedition(s), dive(s) and many other filter parameters.

(Watch demo video.)

The Expedition Listing page shows all expeditions catalogued within Oceans 3.0 since 2006. Not all expeditions had ROV dives with video recordings.

• Click a column header to sort the list by that column in ascending order; click it a second time to sort in descending order. 
• Click the Expedition ID for details about it; this takes you to its Expedition Maintenance page.
• Click View Dives for an expedition to open its Dive Listing page, where you can see a list of all catalogued dives from that expedition. 
• Expeditions are usually set up by ONC Data Stewardship staff.

(Watch demo video.)

Users with administrative permissions can create their own Dives through the Expedition Management page.

To add a dive to an expedition, select the expedition from the list and then click on the 3-dot More button in the SeaTube Catalog Details panel:

Click 'Create Dive':

A popup window will appear for you to enter dive information:

Taxonomies are hierarchical lists of standardized annotation types called taxons. There are two kinds of taxonomies in STv3: Imported and User-Defined.

If you have admin privileges for your organization in SeaTube v3, you can create and edit User-Defined taxonomies in Taxonomy Management.

The taxonomy list

New attributes can be created by admins in Attribute Management. Attributes can be organized into custom Attribute Groups to make them easier to find.

Custom Quick-entry Buttons

You can create your own custom button sets using the Taxon Button Set Configuration screen. Buttons are based on either taxonomies or attributes.

You can also clone existing button sets, creating an identical copy that you can edit.

(Watch demo video.)

Expand
title More...
Button Configuration Create a Comment-only button To create a button solely for Comment text (for example, if there's something you frequently annotate that isn't included in a taxonomy), you will create buttons with the Button Type 'Attribute', where the attribute in question is the 'Comment': Create a Taxonomy button Tips The button Label is not the text that will appear in the annotation - it's solely for the user to identify what the button is. The actual text of the annotation will be: for Taxonomy button types: the Taxon name associated with the button, and any Comment text for Attribute button types: the attribute name(s) and value(s)