...
A corrected version of the original sensor data that has been re-calculated to factor in variables such as falling speed to improve accuracy. “-Corrected” is added at the end of the filename. Sensors without "Corrected" in their names are excluded from the device-level data products.
Oceans 2.0 API filter: dpo_sensorstoinclude=1
Original
The original sensor data, excludes all sensors with "Corrected" in their name.
Oceans 2.0 API filter: sensorstoinclude=0
Quality Control
Pre-processed clean corrected data (uses raw QAQC filter as pass through only) (Only available for corrected sensors or device-level when sensor to include option is Corrected)
There is no quality control option when corrected is chosen for the sensors to include option. The corrected data has already passed through the raw QAQC filter.
Oceans 2.0 API filter: dpo_qualityControl=0
Clean Data (Only available when product is device-level and sensor to include option is original)
If the original sensors are selected, the clean data option will apply the QAQC filter to the data. “-clean” is added at the end of the filename.
Oceans 2.0 API filter: dpo_qualityControl=0
Raw Data (Only available when product is device-level and sensor to include option is original)
If the original sensors are selected, the raw data option will return the data as it is received from the CTD.
Oceans 2.0 API filter: dpo_qualityControl=1
File / Plot Break
Daily
The time range specified will be broken up daily and a plot will be produced for each day. The break time is not strictly midnight, it is 0800 UTC (midnight PST, 0100 PDT).
Oceans 2.0 API filter: dpo_fileplotbreaks=1
None (files break on size limits only)
The time range specified will only be broken up if it exceeds the file size limit (1 GB when loaded into matlab: 400 to 600 MB MAT file).
Oceans 2.0 API filter: dpo_flileplotbreaks=0