...
- Data Search – a new data product options selection form appears when you select a data product.
- Make the sections you want, then Add to Cart. If you want more than one item in your cart before you process them, it is not necessary to press Add to Cart one at a time, just at the very end.
- If you have more than one item checked, the options form applies to the check box highlighted in green.
- The data product options are different for different types of data products. For instance PNG plots has different options than CSV.
- "CSV NaN" option has been removed because now you can select CSV and then select "NaN" in the options form.
- "QA/QC" (data quality) has now been enabled in some of the data products. These data products allow you to choose between "clean" and "raw".
- "Clean" means data that is deemed to be bad according to the QA/QC tests will be removed from the data product. It will either be removed entirely or replaced by NaNs (Not a Number) according to your selection.
- "Raw" means all data will be reported; if the QA/QC tests believe it's bad or suspect data, an appropriate flag number will be put beside that record. In the case of plots, coloured flags will be put beside the bad data (one flag for each group of bad data, not one flag per data point) and the suspect data points will be red or yellow.
- For MAT and CSV, all data will be "raw" at this time, except for averaged data, which is always "clean". Raw and clean options will be enabled in a future release.
- The "clean/raw" option is available for all the Data Search plots (PNG, PDF, staircase, profile, etc).
- For more details see the link at the top of the appropriate data product checkbox. Eg. "Time Series Scalar Plot".
- Plotting Utility:
- The High/Low display option has been renamed "MinMax".
- A new "MinMax+Avg" option has been added. This is now the default for all new plots (but not for saved plots). As usual, the display type can be changed using the Plot Properties feature.
- LISST driver changed to support bioblock
- RBR Virtuoso parser change.
- Improved ADCP driver when slaved to Biosonics devices.
- Newer mechanism for ZAP/ADCP driver synchronization.
- Junction box labels replace breaker #s in JB View, JB Alarms, Quickplots, and Plotting Utility.
- A serial number attribute was created for sensors.
- JB View has been removed from the global menu (must access from Device Console).
- The Device Console diagram is network agnostic. Ie. it doesn't care whether the devices are in the NEPTUNE, VENUS, or Arctic observatories.
| Anchor | ||||
|---|---|---|---|---|
|
18 June 2013 (minor release)
...